dat_ep_dup_connect(Direct Access Transport Library Fundat_ep_dup_connect(3DAT)NAMEdat_ep_dup_connect - establish a connection between the local Endpoint
and a remote Endpoint
SYNOPSIS
cc [ flag... ] file... -ldat [ library... ]
#include <dat/udat.h>
DAT_RETURN
dat_ep_dup_connect (
IN DAT_EP_HANDLE ep_handle,
IN DAT_EP_HANDLE dup_ep_handle,
IN DAT_TIMEOUT timeout,
IN DAT_COUNT private_data_size,
IN const DAT_PVOID private_data,
IN DAT_QOS qos
)
PARAMETERS
ep_handle Handle for an instance of an Endpoint.
dup_ep_handle Connected local Endpoint that specifies a requested
connection remote end.
timeout: Duration of time, in microseconds, that Consumers wait
for Connection establishment. The value of DAT_TIME‐
OUT_INFINITE represents no timeout, indefinite wait.
Values must be positive.
private_data_sizSize of private_data. Must be nonnegative.
private_data Pointer to the private data that should be provided to
the remote Consumer as part of the Connection Request.
If private_data_size is zero, then private_data can be
NULL.
qos Requested Quality of Service of the connection.
DESCRIPTION
The dat_ep_dup_connect() function requests that a connection be estab‐
lished between the local Endpoint and a remote Endpoint. This operation
is used by the active/client side Consumer of the connection model. The
remote Endpoint is identified by the dup_ep_handle. The remote end of
the requested connection shall be the same as the remote end of the
dup_ep_handle. This is equivalent to requesting a connection to the
same remote IA, Connection Qualifier, and connect_flags as used for
establishing the connection on duplicated Endpoints and following the
same redirections.
Upon establishing the requested connection as part of the successful
completion of this operation, the local Endpoint is bound to a Port
Qualifier of the local IA. The Port Qualifier is passed to the remote
side of the requested connection and is available to the remote Con‐
sumer in the Connection Request of the DAT_CONNECTION_REQUEST_EVENT.
The Consumer-provided private_data is passed to the remote side and is
provided to the remote Consumer in the Connection Request. Consumers
can encapsulate any local Endpoint attributes that remote Consumers
need to know as part of an upper-level protocol. Providers can also
provide a Provider on the remote side any local Endpoint attributes and
Transport-specific information needed for Connection establishment by
the Transport.
Upon successful completion of this operation, the local Endpoint is
transferred into DAT_EP_STATE_ACTIVE_CONNECTION_PENDING.
Consumers can request a specific value of qos. The Provider specifies
which Quality of Service it supports in documentation and in the
Provider attributes. If the local Provider or Transport does not sup‐
port the requested qos, the operation fails and DAT_MODEL_NOT_SUPPORTED
is returned synchronously. If the remote Provider does not support the
requested qos, the local Endpoint is automatically transitioned into a
DAT_EP_STATE_UNDISCONNECTED state, the connection is not established,
and the event returned on the connect_evd_handle is DAT_CONNEC‐
TION_EVENT_NON_PEER_REJECTED. The same DAT_CONNEC‐
TION_EVENT_NON_PEER_REJECTED event is returned if connection cannot be
established for all reasons for not establishing the connection, except
timeout, remote host not reachable, and remote peer reject. For exam‐
ple, remote host is not reachable, remote Consumer is not listening on
the requested Connection Qualifier, Backlog of the requested Service
Point is full, and Transport errors. In this case, the local Endpoint
is automatically transitioned into a DAT_EP_STATE_UNDISCONNECTED state.
The acceptance of the requested connection by the remote Consumer is
reported to the local Consumer through a DAT_CONNECTION_EVENT_ESTAB‐
LISHED event on the connect_evd_handle of the local Endpoint.
The rejection of the connection by the remote Consumer is reported to
the local Consumer through a DAT_CONNECTION_EVENT_PEER_REJECTED event
on the connect_evd_handle of the local Endpoint and the local Endpoint
is automatically transitioned into a DAT_EP_STATE_UNDISCONNECTED state.
When the Provider cannot reach the remote host or the remote host does
not respond within the Consumer-requested timeout, a DAT_CONNEC‐
TION_EVENT_UNREACHABLE is generated on the connect_evd_handle of the
Endpoint. The Endpoint transitions into a DAT_EP_STATE_DISCONNECTED
state.
The local Endpoint is automatically transitioned into a
DAT_EP_STATE_CONNECTED state when a Connection Request is accepted by
the remote Consumer and the Provider completes the Transport-specific
Connection establishment. The local Consumer is notified of the estab‐
lished connection through a DAT_CONNECTION_EVENT_ESTABLISHED event on
the connect_evd_handle of the local Endpoint.
When the timeout expired prior to completion of the Connection estab‐
lishment, the local Endpoint is automatically transitioned into a
DAT_EP_STATE_UNDISCONNECTED state and the local Consumer through a
DAT_CONNECTION_EVENT_TIMED_OUT event on the connect_evd_handle of the
local Endpoint.
RETURN VALUES
DAT_SUCCESS The operation was successful.
DAT_INSUFFICIENT_RESOURCES The operation failed due to resource
limitations.
DAT_INVALID_PARAMETER Invalid parameter.
DAT_INVALID_HANDLE The ep_handle or dup_ep_handle parame‐
ter is invalid.
DAT_INVALID_STATE A parameter is in an invalid state.
DAT_MODEL_NOT_SUPPORTED The requested Model is not supported by
the Provider. For example, requested
qos was not supported by the local
Provider.
USAGE
It is up to the Consumer to negotiate outstanding RDMA Read incoming
and outgoing with a remote peer. The outstanding RDMA Read outgoing
attribute should be smaller than the remote Endpoint outstanding RDMA
Read incoming attribute. If this is not the case, connection establish‐
ment might fail.
DAT API does not define a protocol on how remote peers exchange End‐
point attributes. The exchange of outstanding RDMA Read incoming and
outgoing attributes of EPs is left to the Consumer ULP. The Consumer
can use Private Data for it.
If the Consumer does not care about posting RDMA Read operations or
remote RDMA Read operations on the connection, it can set the two out‐
standing RDMA Read attribute values to 0.
If the Consumer does not set the two outstanding RDMA Read attributes
of the Endpoint, the Provider is free to pick up any values as a
default. The Provider is allowed to change these default values during
connection setup.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌─────────────────────────────┬─────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├─────────────────────────────┼─────────────────────────────┤
│Interface Stability │Standard: uDAPL, 1.1, 1.2 │
├─────────────────────────────┼─────────────────────────────┤
│MT-Level │Unsafe │
└─────────────────────────────┴─────────────────────────────┘
SEE ALSOlibdat(3LIB), attributes(5)SunOS 5.10 16 Jul 2004 dat_ep_dup_connect(3DAT)