mitsumi(7)

mitsumi -- Mitsumi CRMC-LU005S non-SCSI host bus adapter

Description

The mitsumi host adapter subsystem enables the SCSI target drivers sc01 to communicate with target controllers and logical units. This driver implements the Storage Device Interface (SDI) for the sc01 SDI target driver.

It is also possible for an application to access the SCSI bus subsystem directly by using the pass-through interface. See pt_open(3X).

This driver is supplied with UnixWare 7 Release 7.1.1, but is no longer supported.

NOTE: Exercise extreme caution when using the pass-through interface. It is possible to interfere with normal system I/O and cause hangs if pass-through is used to an active device. Pass-through should only be used to a device that is otherwise quiescent.

Files

/usr/include/sys/mitsumi.h
/usr/include/sys/scsi.h
/usr/include/sys/sdi.h
/usr/include/sys/sdi_edt.h
/etc/conf/pack.d/mitsumi/space.c

References

pt_open(3X), sc01(7), sdi(7)